Пластины офсетные термальные для CtP, позитивные, однослойные. RX-3000 Thermal CTP General Information Plate Type Thermal digital plate, positive working; optional post bake for longer runs Application Medium run sheeted and web offset applications Substrate Electrochemically Grained and Anodized Aluminum Substrate Aluminum alloy Standard 1052 Alloy / EN AW 1052A Coating Single-layer system, IR sensitive, positive acting Gauge 0.15,0.20, 0.25,0.30, 0.40mm Maximum short grain width 3000mm*1450mm Plate intermix Kodak Electra Excel HRL/HRO Thermal Plates or Kodak XD Thermal Plates, Fuji LH-PJ or Fuji LH-PCE, Agfa Thermostar or Agfa Ampio, etc. Length of Run [1] Unbaked: UV ink 10,000 impressions, normal ink 100,000 impressions Baked: 1 million impressions Exposition Platesetter compability All the main brands in the market: Kodak: Trendsetter/Lotem/Magnus; Fuji: Javelin T9000HS, Heidelberg Topsetter/Suprasetter, Luscher: Xpose Platesetter, etc. Exposure energy 120-140 mJ/m² Spectral Sensitivity 800-850 nm – Peaks 830nm Resolution 1-99% & 250 lpi FM capability 20 micron stochastic Image color Dark blue Processing Processor All the main brands in the market such as Kodak, Agfa, Fuji etc. Developer [2] RX-3000 CDP-II, also other developers provided by Kodak, Agfa, Fuji. Processing temperature 23°C +/- 1°C Dwell time 25-30 sec Developer Rate 100-120 ml/m², depending on use Finishing Plate Finisher RX-3000 PF-II plate finisher, Kodak Multigum Plate Finisher, AGFA RC795, etc. UV ink compatibility Applicable with UV inks when post-baked Fini
Пластины офсетные термальные для CtP, позитивные, однослойные.
RX-3000 Thermal CTP
General Information
Plate Type
Thermal digital plate, positive working; optional post bake for longer runs
Application
Medium run sheeted and web offset applications
Substrate
Electrochemically Grained and Anodized Aluminum Substrate
Aluminum alloy
Standard 1052 Alloy / EN AW 1052A
Coating
Single-layer system, IR sensitive, positive acting
Gauge
0.15,0.20, 0.25,0.30, 0.40mm
Maximum short grain width
3000mm*1450mm
Plate intermix
Kodak Electra Excel HRL/HRO Thermal Plates or Kodak XD Thermal Plates, Fuji LH-PJ or Fuji LH-PCE, Agfa Thermostar or Agfa Ampio, etc.
Length of Run[1]
Unbaked: UV ink 10,000 impressions, normal ink 100,000 impressions
Baked: 1 million impressions
Exposition
Platesetter compability
All the main brands in the market:
Kodak: Trendsetter/Lotem/Magnus;
Fuji: Javelin T9000HS, Heidelberg Topsetter/Suprasetter,
Luscher: Xpose Platesetter, etc.
Exposure energy
120-140 mJ/m²
Spectral Sensitivity
800-850 nm – Peaks 830nm
Resolution
1-99% & 250 lpi
FM capability
20 micron stochastic
Image color
Dark blue
Processing
Processor
All the main brands in the market such as Kodak, Agfa, Fuji etc.
Developer[2]
RX-3000 CDP-II, also other developers provided by Kodak, Agfa, Fuji.
Processing temperature
23°C +/- 1°C
Dwell time
25-30 sec
Developer Rate
100-120 ml/m², depending on use
Finishing
Plate Finisher
RX-3000 PF-II plate finisher, Kodak Multigum Plate Finisher, AGFA RC795, etc.
UV ink compatibility
Applicable with UV inks when post-baked
Finisher rate
30 ml/m²
Storage and handling
Safelight
Daylight handling
Shelf Life
18-24 months under recommended storage conditions
Packaging
Available in all standard formats, including bulk packaging options such as APL packaging
Storage and handling
Unopened plates should be stored in the original pack in a cool and dry environment, away from excessive cold, heat and humidity.
Use in a controlled environment of 30-70 % RH and 5-30 C°
Пластины офсетные термальные для CtP, позитивные, однослойные.
| RX-3000 Thermal CTP |
| General Information |
| Plate Type | Thermal digital plate, positive working; optional post bake for longer runs |
| Application | Medium run sheeted and web offset applications |
| Substrate | Electrochemically Grained and Anodized Aluminum Substrate |
| Aluminum alloy | Standard 1052 Alloy / EN AW 1052A |
| Coating | Single-layer system, IR sensitive, positive acting |
| Gauge | 0.15,0.20, 0.25,0.30, 0.40mm |
| Maximum short grain width | 3000mm*1450mm |
| Plate intermix | Kodak Electra Excel HRL/HRO Thermal Plates or Kodak XD Thermal Plates, Fuji LH-PJ or Fuji LH-PCE, Agfa Thermostar or Agfa Ampio, etc. |
| Length of Run[1] | Unbaked: UV ink 10,000 impressions, normal ink 100,000 impressions
Baked: 1 million impressions |
| Exposition |
| Platesetter compability | All the main brands in the market:
Kodak: Trendsetter/Lotem/Magnus;
Fuji: Javelin T9000HS, Heidelberg Topsetter/Suprasetter,
Luscher: Xpose Platesetter, etc. |
| Exposure energy | 120-140 mJ/m² |
| Spectral Sensitivity | 800-850 nm – Peaks 830nm |
| Resolution | 1-99% & 250 lpi |
| FM capability | 20 micron stochastic |
| Image color | Dark blue |
| Processing |
| Processor | All the main brands in the market such as Kodak, Agfa, Fuji etc. |
| Developer[2] | RX-3000 CDP-II, also other developers provided by Kodak, Agfa, Fuji. |
| Processing temperature | 23°C +/- 1°C |
| Dwell time | 25-30 sec |
| Developer Rate | 100-120 ml/m², depending on use |
| Finishing |
| Plate Finisher | RX-3000 PF-II plate finisher, Kodak Multigum Plate Finisher, AGFA RC795, etc. |
| UV ink compatibility | Applicable with UV inks when post-baked |
| Finisher rate | 30 ml/m² |
| Storage and handling |
| Safelight | Daylight handling |
| Shelf Life | 18-24 months under recommended storage conditions |
| Packaging | Available in all standard formats, including bulk packaging options such as APL packaging |
| Storage and handling | Unopened plates should be stored in the original pack in a cool and dry environment, away from excessive cold, heat and humidity.
Use in a controlled environment of 30-70 % RH and 5-30 C° |
SENDING A REQUEST ...
