Пластины офсетные термальные для CtP, позитивные, двухслойные. RX-3600 Thermal CTP (Double Layer) General Information Plate Type Fast thermal digital plate, positive working; optional post bake for longer runs Application Medium run and UV print application Substrate Electrochemically Grained andAnodizedAluminum Substrate Aluminum alloy Standard 1052 Alloy / EN AW 1052A Coating Two-layer system, IR sensitive, positive acting Gauge 0.15,0.20, 0.25,0.30, 0.40mm Maximum short grain width 3000mm*1450mm Plate intermix Fuji Brilla LH-PJE, LH-PLE, LH-PJ2 or Brilla LP-NV2, Agfa Energy Elite or Amigo, Kodak Sworld Ultra Plate, Kodak Trillia SP, Kodak Electra Excel HRL/HRO plate Length of Run [1] Unbaked: UV ink 30,000 impressions, normal ink 100,000 impressionsBaked: 1 million impressions Exposition Platesetter compability All the main brands in the market: Kodak: Trendsetter/Lotem/Magnus; Fuji: Javelin T9000HS, Heidelberg Topsetter/Suprasetter,Luscher: Xpose Platesetter, etc. Exposure energy 100-110 mJ/m² Spectral Sensitivity 800-850 nm – Peaks 830nm Resolution 1-99% & 250 lpi FM capability 20 micronstochastic Image color Dark blue Processing Processor All the main brands in the market such as Kodak, Agfa, Fuji etc. Developer [2] JRT 8-9 developer, also other developers provided by Kodak, Agfa, Fuji. Processing temperature 23°C +/- 1°C Dwell time 15-20 sec Developer Rate 80-90 ml/m², depending on use Finishing Plate Finisher JRT 8-9 plate finisher, Kodak Multigum Plate Finisher, AGFA RC795, etc. UV ink compatibility Applicable with UV inks Finisher rate 30 ml/m² Storage and handling Safelight Daylight handling Shelf Life 18 months under recommended storage conditions Packaging Available in all standa
Пластины офсетные термальные для CtP, позитивные, двухслойные.
RX-3600 Thermal CTP (Double Layer)
General Information Plate Type Fast thermal digital plate, positive working; optional post bake for longer runs
Application Medium run and UV print application
Substrate Electrochemically Grained andAnodizedAluminum Substrate
Aluminum alloy Standard 1052 Alloy / EN AW 1052A
Coating Two-layer system, IR sensitive, positive acting
Gauge 0.15,0.20, 0.25,0.30, 0.40mm
Maximum short grain width 3000mm*1450mm
Plate intermix Fuji Brilla LH-PJE, LH-PLE, LH-PJ2 or Brilla LP-NV2, Agfa Energy Elite or Amigo, Kodak Sworld Ultra Plate, Kodak Trillia SP, Kodak Electra Excel HRL/HRO plate
Length of Run[1] Unbaked: UV ink 30,000 impressions, normal ink 100,000 impressionsBaked: 1 million impressions
Exposition Platesetter compability All the main brands in the market:
Kodak: Trendsetter/Lotem/Magnus;
Fuji: Javelin T9000HS, Heidelberg Topsetter/Suprasetter,Luscher: Xpose Platesetter, etc.
Exposure energy 100-110 mJ/m²
Spectral Sensitivity 800-850 nm – Peaks 830nm
Resolution 1-99% & 250 lpi
FM capability 20 micronstochastic
Image color Dark blue
Processing Processor All the main brands in the market such as Kodak, Agfa, Fuji etc.
Developer[2] JRT 8-9 developer, also other developers provided by Kodak, Agfa, Fuji.
Processing temperature 23°C +/- 1°C
Dwell time 15-20 sec
Developer Rate 80-90 ml/m², depending on use
Finishing Plate Finisher JRT 8-9 plate finisher, Kodak Multigum Plate Finisher, AGFA RC795, etc.
UV ink compatibility Applicable with UV inks
Finisher rate 30 ml/m²
Storage and handling Safelight Daylight handling
Shelf Life 18 months under recommended storage conditions
Packaging Available in all standard formats, including bulk packaging options such as APL packaging
Storage and handling Unopened plates should be stored in the original pack in a cool and dry environment, away from excessive cold, heat and humidity.Use in a controlled environment of 30-70 % RH and 5-30 C°
Пластины офсетные термальные для CtP, позитивные, двухслойные.
| RX-3600 Thermal CTP (Double Layer) |
| General Information |
| Plate Type | Fast thermal digital plate, positive working; optional post bake for longer runs |
| Application | Medium run and UV print application |
| Substrate | Electrochemically Grained andAnodizedAluminum Substrate |
| Aluminum alloy | Standard 1052 Alloy / EN AW 1052A |
| Coating | Two-layer system, IR sensitive, positive acting |
| Gauge | 0.15,0.20, 0.25,0.30, 0.40mm |
| Maximum short grain width | 3000mm*1450mm |
| Plate intermix | Fuji Brilla LH-PJE, LH-PLE, LH-PJ2 or Brilla LP-NV2, Agfa Energy Elite or Amigo, Kodak Sworld Ultra Plate, Kodak Trillia SP, Kodak Electra Excel HRL/HRO plate |
| Length of Run[1] | Unbaked: UV ink 30,000 impressions, normal ink 100,000 impressionsBaked: 1 million impressions |
| Exposition |
| Platesetter compability | All the main brands in the market:
Kodak: Trendsetter/Lotem/Magnus;
Fuji: Javelin T9000HS, Heidelberg Topsetter/Suprasetter,Luscher: Xpose Platesetter, etc. |
| Exposure energy | 100-110 mJ/m² |
| Spectral Sensitivity | 800-850 nm – Peaks 830nm |
| Resolution | 1-99% & 250 lpi |
| FM capability | 20 micronstochastic |
| Image color | Dark blue |
| Processing |
| Processor | All the main brands in the market such as Kodak, Agfa, Fuji etc. |
| Developer[2] | JRT 8-9 developer, also other developers provided by Kodak, Agfa, Fuji. |
| Processing temperature | 23°C +/- 1°C |
| Dwell time | 15-20 sec |
| Developer Rate | 80-90 ml/m², depending on use |
| Finishing |
| Plate Finisher | JRT 8-9 plate finisher, Kodak Multigum Plate Finisher, AGFA RC795, etc. |
| UV ink compatibility | Applicable with UV inks |
| Finisher rate | 30 ml/m² |
| Storage and handling |
| Safelight | Daylight handling |
| Shelf Life | 18 months under recommended storage conditions |
| Packaging | Available in all standard formats, including bulk packaging options such as APL packaging |
| Storage and handling | Unopened plates should be stored in the original pack in a cool and dry environment, away from excessive cold, heat and humidity.Use in a controlled environment of 30-70 % RH and 5-30 C° |
SENDING A REQUEST ...
